🔧 Main Types & Features
Bi-metal Liner
The most widely used and highest-volume type. It combines a forged carbon steel outer sleeve with a high-chromium cast iron inner sleeve. After heat treatment, the inner sleeve hardness can reach HRC 62 or above, withstanding mud pressures up to 7,000 psi. Typical service life is 800 hours or more, making it a cost-effective general-purpose choice.
Ceramic Liner
The inner sleeve is typically made of zirconia or ZTA (zirconia-toughened alumina) ceramic. Ceramic offers extremely high hardness and far superior wear resistance to metal, though with relatively lower toughness. Its service life is outstanding—typically 3,000 to 5,000 hours, several times that of a bi-metal liner, significantly reducing downtime for replacement.
Nickel-based Alloy Liner
A relatively new technology route. A nickel-based alloy layer of about 1.5 mm is formed on the inner wall through vacuum sintering, with hardness between HRC 60–64. Its service life is much longer than ordinary metal liners, reaching 2,000 hours or more, with good resistance to thermal shock and cracking.
📏 Key Performance Parameters
Inner Diameter: Commonly 4" to 8" (100–200 mm), matched to pump model.
Working Pressure: Up to 7,000 psi (48 MPa) for standard models; higher for special designs.
Hardness: HRC 60–64 depending on material.
Service Life: 800+ hours (bi-metal), 2,000+ hours (nickel-based), 3,000–5,000 hours (ceramic).
Temperature Resistance: Up to 120°C for standard; higher with special materials.
Inner Diameter: Commonly 4" to 8" (100–200 mm), matched to pump model.
Working Pressure: Up to 7,000 psi (48 MPa) for standard models; higher for special designs.
Hardness: HRC 60–64 depending on material.
Service Life: 800+ hours (bi-metal), 2,000+ hours (nickel-based), 3,000–5,000 hours (ceramic).
Temperature Resistance: Up to 120°C for standard; higher with special materials.
📐 Common Standards
API Spec 7K: Drilling and well servicing equipment.
API RP 13C: For related solids control equipment.
ISO 9001: Quality management for manufacturers.
API Spec 7K: Drilling and well servicing equipment.
API RP 13C: For related solids control equipment.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For harsh conditions (high sand, corrosive): Ceramic liners offer lower total cost of ownership despite higher unit price.
For routine drilling: Bi-metal liners are the economical, general-purpose choice.
For extended service intervals: Nickel-based alloy or ceramic liners reduce downtime.
Size matching: Select the liner inner diameter to match the specific mud pump model (e.g., National, Gardner Denver, Bomco, Emsco).
Compliance: Check for API 7K compliance for better dimensional tolerances and interchangeability.
For harsh conditions (high sand, corrosive): Ceramic liners offer lower total cost of ownership despite higher unit price.
For routine drilling: Bi-metal liners are the economical, general-purpose choice.
For extended service intervals: Nickel-based alloy or ceramic liners reduce downtime.
Size matching: Select the liner inner diameter to match the specific mud pump model (e.g., National, Gardner Denver, Bomco, Emsco).
Compliance: Check for API 7K compliance for better dimensional tolerances and interchangeability.










