🔧 Key Features
Quarter-turn operation: Opens or closes with only 90° of handle rotation, enabling fast and easy operation.
Excellent sealing: The ball seats tightly against the valve seats, providing reliable shut-off with minimal leakage.
Low flow resistance: When fully open, the bore is in line with the pipe, resulting in very low pressure drop.
Compact and durable: Simple structure, few moving parts, and long service life.
📊 Main Types
By Ball Design
Floating Ball Valve: The ball is held in place by the seats and moves slightly under fluid pressure to seal against the downstream seat. Suitable for small to medium sizes and lower pressures.
Trunnion-Mounted Ball Valve: The ball is anchored by trunnions at the top and bottom, so it does not shift under pressure. Used for large sizes and high-pressure applications.
By Body Construction
One-Piece: Compact, low cost, but difficult to repair.
Two-Piece: Easier to assemble and maintain.
Three-Piece: Allows full access for maintenance; often used in sanitary and high-purity applications.
By Bore
Full Bore: The bore matches the pipe ID, allowing pigging and minimal pressure drop.
Reduced Bore: The bore is smaller than the pipe ID, offering a lighter, more economical design.
By Operation
Manual: Handle or gear operated.
Actuated: Pneumatic, electric, or hydraulic actuation for remote or automated control.
📏 Common Standards & Specifications
Design Standards: API 6D, ASME B16.34, ISO 17292.
Pressure Classes: ASME Class 150 to 2500, or API 2000 psi to 20,000 psi for oilfield applications.
Size Range: Typically 1/4" to 48" or larger.
End Connections: Flanged, threaded, welded, or wafer/lug type.
Material Options: Carbon steel, stainless steel, duplex, alloy steel, brass, PVC, etc.
💡 Selection Guidelines
For high-pressure oilfield service: Choose API 6A / 6D trunnion-mounted ball valves with NACE MR-0175 compliance for sour service.
For general isolation: A floating ball valve with full bore is often sufficient and cost-effective.
For frequent operation: Consider actuated ball valves (pneumatic, electric, or hydraulic) for remote or automated control.
For pigging lines: Full bore design is required.










