🔧 Working Principle
The centrifuge consists of a high-speed rotating bowl and an internal scroll conveyor that rotates at a slightly different speed in the same direction. Drilling mud enters through the feed tube into the scroll, then passes into the bowl. Under centrifugal force hundreds to thousands of times greater than gravity, heavier solids settle against the bowl wall and are conveyed by the scroll to the conical end for discharge. The lighter liquid phase forms an inner layer and overflows from the large end of the bowl. This continuous process achieves solid-liquid separation.
📊 Main Types by Application
Medium-Speed Centrifuge (Barite Recovery)
Operates at lower G-force (typically 700–1,000 G, around 2,000–2,200 rpm). Its primary function is to recover barite from weighted drilling fluids. The separated high-density solids are returned to the mud system, while the liquid phase flows to the high-speed centrifuge for further treatment.
High-Speed Centrifuge (Fine Solids Removal)
Operates at higher G-force (typically 1,800–2,300 G, around 2,800–3,200 rpm). It removes ultra-fine low-gravity solids that accumulate during extended circulation. The separated solids are discharged as waste, and the cleaned fluid is returned to the mud system.
📏 Key Performance Parameters
Parameter Typical Range Bowl Diameter 14" to 24" (350–600 mm) Max G-Force 700–3,200 G Bowl Speed 2,000–3,200 rpm (VFD adjustable) Processing Capacity 30–150 m³/h depending on model Main Motor Power 30–75 kW Differential Speed 1–50 rpm (adjustable) Separation Cut Point 2–7 μm
| Parameter | Typical Range |
|---|---|
| Bowl Diameter | 14" to 24" (350–600 mm) |
| Max G-Force | 700–3,200 G |
| Bowl Speed | 2,000–3,200 rpm (VFD adjustable) |
| Processing Capacity | 30–150 m³/h depending on model |
| Main Motor Power | 30–75 kW |
| Differential Speed | 1–50 rpm (adjustable) |
| Separation Cut Point | 2–7 μm |
📐 Common Standards
💡 Selection Guidelines
For barite recovery: Choose a medium-speed unit (700–1,000 G) to selectively separate high-density barite particles without discarding them.
For fine solids removal: Choose a high-speed unit (1,800–2,300 G) to remove low-gravity solids that cause mud weight to rise.
For complete systems: A dual-centrifuge configuration (medium-speed + high-speed) is standard in most drilling rigs, minimizing solids discharge and reducing drilling costs.
VFD matters: Variable frequency drive allows speed adjustment for different mud conditions, improving separation efficiency.
For barite recovery: Choose a medium-speed unit (700–1,000 G) to selectively separate high-density barite particles without discarding them.
For fine solids removal: Choose a high-speed unit (1,800–2,300 G) to remove low-gravity solids that cause mud weight to rise.
For complete systems: A dual-centrifuge configuration (medium-speed + high-speed) is standard in most drilling rigs, minimizing solids discharge and reducing drilling costs.
VFD matters: Variable frequency drive allows speed adjustment for different mud conditions, improving separation efficiency.










