🔧 Working Principle
Gas-cut mud is drawn into a vacuum chamber by a vacuum pump. Inside the chamber, the mud is spread into a thin film over baffle plates, and the vacuum environment causes the gas to break out of the liquid. The released gas is evacuated by the vacuum pump, while the degassed mud is discharged by a centrifugal pump back to the mud system.
📊 Main Types
Vacuum Degasser
The most common type in drilling operations.
Uses a vacuum pump to create negative pressure inside the chamber.
Suitable for all mud weights and types, including oil-based and water-based mud.
Processing capacity typically 200–400 m³/h.
Atmospheric Degasser
Uses gravity and agitation to release gas at atmospheric pressure.
Simpler and lower cost, but less efficient for heavy or viscous mud.
Mainly used for shallow wells or low-gas conditions.
Centrifugal Degasser
Uses centrifugal force to separate gas from mud.
Compact design, but limited capacity and mainly for small rigs.
📏 Key Performance Parameters
Processing Capacity: 200–400 m³/h (vacuum type).
Vacuum Degree: Typically -0.03 to -0.05 MPa.
Motor Power: 15–45 kW for the main drive and vacuum pump.
Inlet/Outlet Size: 4–8 inches depending on model.
Separation Efficiency: Can reduce gas content to below 1% in most cases.
📐 Common Standards
API Spec 7K: For drilling and well servicing equipment.
API RP 13C: For related solids control equipment.
ISO 9001: Quality management for manufacturers.
ATEX / IECEx: Required for offshore or hazardous-area installations.
💡 Selection Guidelines
For high-gas wells: Choose a vacuum degasser with sufficient capacity to match the mud circulation rate.
For offshore / hazardous areas: Ensure the unit is ATEX or IECEx certified.
For oil-based mud: Vacuum degassers are preferred because they handle gas-cut OBM effectively.
System integration: A degasser is usually placed after the shale shaker and before the desander/desilter in a complete solids control system. In some configurations, it is installed after the mud cleaner.










