🔧 Working Principle
Fluid is drawn into the pump cavity and, as the screw rotates, sealed chambers form and move axially from the suction end to the discharge end. The continuous, non-pulsating movement of these chambers pushes the fluid forward with minimal shear and agitation. This makes screw pumps ideal for viscous, shear-sensitive, or solids-laden fluids.
📊 Main Types
Single Screw Pump (Progressive Cavity Pump, PCP)
Consists of a helical metal rotor and a rubber or elastomer stator.
Handles high-viscosity fluids and those containing solids.
Commonly used in oilfield artificial lift, drilling waste transfer, and sludge pumping.
Flow capacity typically up to 200 m³/h, pressure up to 6 MPa.
Twin Screw Pump (Double Screw Pump)
Two intermeshing screws rotate in opposite directions inside the casing.
No metal-to-metal contact between screws; low wear and long life.
Suitable for clean, lubricating, or non-lubricating fluids.
Widely used in oil and gas gathering, fuel transfer, and hydraulic systems.
Flow capacity up to 3,000 m³/h, pressure up to 4 MPa.
Three Screw Pump
Three screws: one driving screw and two idler screws.
Very smooth, low-pulsation flow with low noise.
Handles high-pressure, clean lubricating fluids.
Commonly used in hydraulic systems, fuel oil delivery, and lubrication.
Pressure up to 10 MPa.
📏 Key Performance Parameters
Flow Rate: 1–3,000 m³/h depending on type and size.
Discharge Pressure: Up to 6 MPa (PCP), 4 MPa (twin screw), 10 MPa (three screw).
Viscosity Range: Up to 100,000 cSt for single screw pumps.
Temperature: Typically up to 120°C, higher with special materials.
Solids Handling: Single screw pumps can handle solids up to a certain size; twin and three screw pumps require clean fluids.
Motor Power: 1.5–250 kW depending on capacity.
📐 Common Standards
API 676: Positive displacement pumps—rotary pumps (for oil and gas industry).
API RP 11S: Recommended practice for progressive cavity pumps.
ISO 15136: Progressing cavity pump systems for artificial lift.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For viscous or solids-laden fluids: Choose a single screw (PCP) with the appropriate stator elastomer.
For clean, high-flow oil transfer: Choose a twin screw pump.
For high-pressure lubrication or hydraulic service: Choose a three screw pump.
For drilling waste transfer: Single screw pumps are commonly used for cuttings slurry and sludge.
For artificial lift: PCPs are widely used in heavy oil and high-sand wells.










