🔧 Working Principle
The agitator consists of a motor, gearbox, shaft, and impeller. The motor drives the impeller through the gearbox at a speed typically between 60 and 300 rpm, depending on the impeller diameter. The rotating impeller creates axial and radial flow patterns that keep solids suspended and promote uniform mixing of mud, chemicals, and additives.
📊 Main Types
By Impeller Type
Propeller Type: High-speed, small diameter; used for low-viscosity fluids and chemical mixing.
Turbine Type: Medium-speed, larger diameter; provides strong circulation for heavy mud.
Paddle Type: Low-speed, large diameter; gentle mixing for high-viscosity or shear-sensitive fluids.
By Drive Arrangement
Top-Entry: Motor and gearbox mounted above the tank; most common in drilling operations.
Side-Entry: Mounted on the tank side; used where top access is limited.
Bottom-Entry: Rare; used in special tank configurations.
By Mounting
Vertical Agitator: Standard configuration for mud tanks; shaft perpendicular to tank surface.
Horizontal Agitator: Used in specific tank designs or for large-volume mixing.
📏 Key Performance Parameters
Motor Power: 3–30 kW depending on tank volume and mud weight.
Impeller Speed: 60–300 rpm.
Impeller Diameter: 300–1,200 mm.
Shaft Length: 1–3 m; matched to tank depth.
Flow Rate: Designed to turn over the tank volume in 15–30 minutes.
📐 Common Standards
API Spec 7K: Drilling and well servicing equipment.
API RP 13C: For related solids control equipment.
ISO 9001: Quality management for manufacturers.
Explosion-Proof Rating: Required for hazardous-area installations (e.g., Ex d IIB T4).
💡 Selection Guidelines
For heavy mud (high density): Choose a turbine-type agitator with higher power and larger impeller.
For chemical mixing: Propeller-type agitators provide better shear and dispersion.
For large tanks: Multiple agitators may be required; typical spacing is every 6–8 meters.
For hazardous areas: Ensure the motor meets explosion-proof requirements.
For high-viscosity fluids: Lower speed and larger impeller area are preferred to avoid dead zones.










