🔧 Working Principle
The unit typically consists of a triplex or quintuplex plunger pump driven by a diesel engine or electric motor through a transmission. Cement slurry or other fluids are pumped at high pressure and controlled rate into the wellbore for cementing casing, plugging, or stimulation treatments. The trailer-mounted design allows the entire unit to be towed by a truck tractor to different well sites.
📊 Key Components
Plunger Pump: Triplex or quintuplex, rated up to 10,000–15,000 psi.
Power Pack: Diesel engine or electric motor, typically 300–600 HP.
Transmission: Mechanical or hydraulic drive.
Mixing System: Recirculating mixer or jet mixer for cement slurry preparation.
Control Panel: Manual or PLC-controlled, with pressure and flow monitoring.
Trailer Chassis: Heavy-duty, road-legal trailer with brakes and lights.
Auxiliary Equipment: Water tank, chemical additive system, manifold, and safety valves.
📏 Key Performance Parameters
Maximum Pressure: 10,000–15,000 psi (69–103 MPa).
Flow Rate: 0.5–3 m³/min depending on plunger size and speed.
Engine Power: 300–600 HP.
Plunger Diameter: 3"–4.5".
Trailer Capacity: Typically designed for 20–40 ft trailer length.
Weight: 15–30 tons depending on configuration.
📐 Common Standards
API Spec 7K: Drilling and well servicing equipment.
API Spec 10D: Casing centralizers and cementing accessories.
API RP 10B: Recommended practice for cementing.
DOT / Road Regulations: For trailer roadworthiness and transport.
ISO 9001: Quality management for manufacturers.
💡 Selection Guidelines
For small to medium rigs: A trailer-mounted unit offers good mobility and sufficient pressure.
For high-pressure cementing: Choose a quintuplex pump rated at 15,000 psi.
For offshore or Arctic conditions: Consider skid-mounted or winterized versions instead.
For frequent relocation: Trailer-mounted is ideal; for long-term fixed sites, skid-mounted may be more economical.
Automation: PLC-controlled units provide better precision for complex cementing jobs.










